雕塑的优点是耐候性强，不褪色等，艺术手法还原度好，细节表现的更为精细，但其工艺复杂、流程繁多、成本也高，所以
山东浮雕雕塑厂家在雕塑的维护保养很重要的。
Sculpture has the advantages of strong weather resistance, color fastness, etc., good restoration of artistic techniques, and more detailed performance, but its process is complex, numerous processes, and high cost. Therefore, Shandong relief sculpture manufacturers are very important in the maintenance of sculpture.
1、环境：雕塑对环境的要求须保持干燥，所处的温度控制在18℃-24℃，湿度在40%-50%，没有尘埃和空气污染物。
1. Environment: The sculpture must be kept dry, the temperature should be controlled at 18 ℃ - 24 ℃, the humidity should be 40% - 50%, and there should be no dust and air pollutants.
2、预防：在保养雕塑时,要学会预防一些外界的有害化学物质,如酸类、油脂、氯化物等。排除外界因素的同时我们尽量避免在搬运过程中直接用手触碰雕塑，不可用手直接接触,以避免被手上的汗腐蚀，也不可用油污的纸或盒子来包装。
2. Prevention: When maintaining sculpture, learn to prevent some harmful chemicals from outside, such as acids, grease, chlorides, etc. While excluding the external factors, we try to avoid touching the sculpture directly with hands during the handling process, and do not touch it directly with hands to avoid being corroded by sweat on the hands, and do not use oily paper or boxes for packaging.
3、清洁：在对雕塑进行清洁的时候要切忌小心谨慎，一定要用干净而又柔软的布片来擦去尘埃，对于雕塑有些沟处不易用布擦到的地方用毛刷或是吸尘器来吹走灰尘。
3. Cleaning: Do not be careful when cleaning the sculpture. Be sure to use a clean and soft cloth to remove the dust. Use a brush or vacuum cleaner to blow away the dust at some grooves of the sculpture where it is difficult to use a cloth.
4、维护：预防雕塑受到机械性损坏，相互间不应该彼此碰撞、不要叠压码放、对于细工精制和容易损坏的铜雕,更加要小心维护。
4. Maintenance: prevent sculptures from mechanical damage, do not collide with each other, do not stack, and pay more attention to the fine and easily damaged bronze sculptures.
5、涂蜡：有条件可以在铜摆件表面打一些蜡用于防止铜表面氧化长铜锈。
5. Waxing: If possible, you can apply some wax on the surface of copper ornaments to prevent copper surface from oxidation and long copper rust.
6、抛光：雕塑摆放时间过长之后，根据摆放的环境或多或少会出现一些暗哑的现象，这个时候可以用棉丝质的细布轻轻来回擦拭，可达到抛光的效果，从而让表面的保护蜡层重新焕发光。
6. Polishing: After the sculpture is placed for a long time, there will be some dull phenomena more or less according to the placing environment. At this time, you can use a cotton silk cloth to gently wipe back and forth to achieve the polishing effect, so that the protective wax layer on the surface can glow again.
The above is an introduction to how sculpture manufacturers maintain their sculptures daily. I hope it can help you. More relevant content will come to our website http://www.aswjc.com Consult and understand!
