GRC构件作为外部装饰的常用材料，GRC构件被广泛使用，因此客户通常不只是订购一个或多个GRC构件。那么，在大量生产GRC构件之前，我们需要准备哪些准备工作？下面山东GRC构件厂家为您讲解。

GRC components are widely used as common materials for exterior decoration, so customers usually do not just order one or more GRC components. So, what preparations do we need to prepare before mass production of GRC components? Next, Shandong GRC component manufacturer will explain to you.

1.产品打样确认：

1. Product proofing confirmation:

根据甲方提供的效果图或实物样品，样品应注意以下几点：

According to the renderings or physical samples provided by Party A, the samples should pay attention to the following points:

表面效果符合甲方要求；

The surface effect shall meet the requirements of Party A;

样品颜色符合甲方要求。

The color of the sample meets the requirements of Party A.

应一次抽取两个样本。样品制成后，销售人员应对其进行一次检查，以查看其是否合格。检查时需要注意检查表面效果，色差，是否存在毛孔，是否龟裂等，并在将模板照片发送给甲方之前确认样品正确。甲方确认甲方将发送确认后将样本打包交给甲方的设计师签名。设计师将为甲方签字，另一名将签字退还给公司以取得商品。

Two samples shall be taken at a time. After the sample is made, the salesperson should first check it to see if it is qualified. During inspection, attention shall be paid to checking the surface effect, color difference, whether there are pores, cracks, etc., and confirming that the samples are correct before sending the template photos to Party A. Party A confirms that Party A will send the samples to Party A's designer for signature after confirmation. The designer will sign for Party A, and the other will sign and return to the company to obtain the goods.

应提醒公司的打样人员保持样品配方，并避免在生产产品时再次掺杂。

The proofing personnel of the company should be reminded to keep the sample formula safe and avoid re doping when producing products.

2.图纸深化确认：

2. Drawing deepening confirmation:

设计师应加深良好的图纸，并应由公司图纸主管进行审查。验证正确之后，会将设计者发送给设计者进行审查。甲方确认图纸后，甲方应签字并退还公司。甲方设计者签名和审查的图纸应保存在的地方，如有任何争议，可作为今后的依据。

The designer should deepen the good drawings, and should first be reviewed by the company's drawing director. After verification, the designer will be sent to the designer for review. After Party A confirms the drawings, Party A shall sign and return them to the Company. The drawings signed and reviewed by the designer of Party A shall be kept in a safe place, and in case of any dispute, they can be used as the basis for the future.

3.模具制作模具验收：

3. Die making and acceptance:

有四种类型的模具。有钢模，玻璃钢模，木模和硅树脂模，并且重复使用率依次降低。钢模由制造商根据图纸生产。当需要使用硅胶模具时，使用玻璃纤维增强塑料模具。由于硅树脂模具相对较软，因此需要由FRP模具支撑以保持产品的形状。

There are four types of molds. There are steel mold, glass fiber reinforced plastic mold, wood mold and silicone mold, and the reuse rate decreases in turn. The steel formwork shall be produced by the manufacturer according to the drawings. When silicone mold is required, glass fiber reinforced plastic mold shall be used. Since the silicone mold is relatively soft, it needs to be supported by the FRP mold to maintain the shape of the product.

上面是对GRC构件进行批量生产之前的准备工作的相关内容，希望能够给您帮助，不过建议您仔细看看，做好相应的准备工作，防止问题的出现影响到自家的工程使用。关注我们http://www.aswjc.com，了解更多注意事项！

The above contents are related to the preparation before mass production of GRC components, and I hope they can help you, but I suggest you take a closer look and make corresponding preparations to prevent problems from affecting your own engineering use. Follow us http://www.aswjc.com , learn more!