GRC构件的嵌入式部件和连接器的设计应满足相关文件的要求；因此，在设计
济南GRC构件的嵌入式部分时，我们需要考虑以下因素：
The design of embedded components and connectors of GRC components shall meet the requirements of relevant documents; Therefore, when designing the embedded part of Jinan GRC components, we need to consider the following factors:
1.它具有足够的刚度和强度，可以承受GRC部件在自身重量，风载荷和地震载荷下传递给嵌入式部件的内力。
1. It has sufficient rigidity and strength to withstand the internal force transmitted by GRC components to embedded components under its own weight, wind load and earthquake load.
2.满足运输，安装和吊装过程中的建筑负荷要求。
2. Meet the building load requirements during transportation, installation and hoisting.
3.对于变形受到限制的部件，将产生很大的内力，并且嵌入部件应与连接构件结合在一起，以形成可移位的弹性接头系统。
3. For parts with limited deformation, large internal forces will be generated, and the embedded parts shall be combined with the connecting members to form a displaceable elastic joint system.
4.预埋件牢固地锚固在GRC中，锚固肋与镀锌预埋件之间的连接不会损坏镀锌层。锚固肋的锚固长度满足混凝土中锚固长度的要求，并具有足够厚度的保护层。
4. Embedded parts shall be firmly anchored in GRC, and the connection between anchor rib and galvanized embedded parts shall not damage the galvanized layer. The anchorage length of the anchor rib shall meet the requirements of the anchorage length in the concrete and shall have a protective layer of sufficient thickness.
5.埋入部分和锚固肋应部分加固以适应应力集中。
5. The embedded part and anchor rib shall be partially reinforced to adapt to stress concentration.
6.嵌入零件的位置正确。特别是，边缘的构件（例如嘴，窗户，门道和拐角）必须正确定位和定向。
6. The position of embedded parts is correct. In particular, the components of the edges (such as mouth, window, doorway and corner) must be correctly positioned and oriented.
7.外部探测的嵌入式零件的外部长度和钻孔位置设计正确，适合安装。
7. The external length and drilling position of embedded parts for external detection are designed correctly and suitable for installation.
8.对于重量大于50kg的构件，应提供一个环来固定电缆，以使该构件除了安装节点外还具有非刚性的悬挂连接以防止跌落。
8. For components with a weight greater than 50kg, a safety ring shall be provided to fix the safety cable, so that the component has non rigid suspension connection in addition to the installation node to prevent falling.
The above is what needs to be considered when designing the embedded part of GRC component. You can visit our website for relevant contents of this component http://www.aswjc.com Consultation and understanding.
