GRC构件是一种通过造型、纹理、质感与色彩表达设计师想象力的材料。下面小编给大家介绍一下GRC构件的性能主要表现在哪些方面。

GRC component is a kind of material that expresses designers' imagination through modeling, texture, texture and color. The following editor will introduce the main performance aspects of GRC components.

⑴GRC构件采用特种低碱水泥与特种玻璃纤维复合材料经过多种工序精制而成，其具有高强度、抗老化、质量轻、成型多样化、施工简单、耐火、耐候化、耐酸碱等优点。与混凝土同等性能及寿命，使其成为欧陆式建筑及景观等工程的新宠。在造型应用上，因其的性能从普通的石膏装饰材料、玻璃钢等造型材料中脱颖而出。

⑴ GRC components are made of special low alkali cement and special glass fiber composites through various processes, which have the advantages of high strength, anti-aging, light weight, diversified molding, simple construction, fire resistance, weathering resistance, acid and alkali resistance, etc. With the same performance and service life as concrete, it has become the new favorite of European architecture and landscape engineering. In modeling application, it stands out from ordinary gypsum decorative materials, FRP and other modeling materials because of its excellent performance.

⑵其主要的物理力学性能、强度模量1.8～2.8×104m/㎡，抗冲强度15～25kg/m2，抗压强度4.7kg/m2。

(2) its main physical and mechanical properties and strength modulus are 1.8 ~ 2.8 × 104m/ ㎡, impact strength 15 ~ 25kg/m2, compressive strength 4.7kg/m2.

⑶GRC构件模具采用玻璃钢制作经过精雕细琢、抛光打磨而成，使其生产的构件表面光滑，符合设计图纸要求。

(3) GRC component mold is made of glass fiber reinforced plastics and is carefully carved, polished and polished to make the surface of the components produced smooth and meet the requirements of the design drawings.

⑷济南GRC构件在生产过程中，经过表面保护处理，内部分布防震、防裂玻璃纤维网布均匀应力预埋钢筋和沙浆高压喷制而成、浸泡保养、等工序而成。

(4) in the production process, Jinan GRC components are made by surface protection treatment, internal distribution of shockproof and crack proof glass fiber mesh, uniform stress embedded reinforcement and mortar, high-pressure spraying, soaking maintenance, and other processes.

⑸其构件在出厂前、经过严格的质量层层把关，不放过任何一件不合格产品出厂。构件的缺口不大于4cm;构件的几何尺寸不超过标准尺寸±5mm为合格;每块构件不得有横向贯通构件底面的暗裂。

(5) before leaving the factory, its components have been strictly checked at all levels of quality, and no unqualified products are allowed to leave the factory. The notch of the component shall not be greater than 4cm; If the geometric dimension of the component does not exceed ± 5mm of the standard dimension, it is qualified; Each member shall not have concealed cracks on the bottom surface of the transverse through member.

此外如果GRC构件的边角或形状复杂的凸起部分与外界接触面积较大，水汽侵入的可能性也较大，往往是先发生冻融破坏的地方，所以这个问题要多注意，更多内容就来网站http://www.aswjc.com咨询吧。

In addition, if the edges and corners of GRC components or the convex part with complex shape have a large contact area with the outside world, the possibility of water vapor intrusion is also large, and it is often the place where freeze-thaw damage occurs first, so pay more attention to this problem, and come to the website for more information http://www.aswjc.com Consult.