GRC构件具有高强度、高韧性、耐火、耐水等优点，所以很受人们的欢迎，当然要想更好的使用就要经常维护保养它，GRC构件的维护有一定的顺序可循，下面来看看吧。

　　GRC components have high strength, high toughness, fire resistance, water resistance and other advantages, so it is very popular with people, of course, to better use will often maintain it, GRC component maintenance has a certain order to follow, let's see.

　　改性后，通常需要用干净良好的聚乙烯薄膜包裹模具，使GRC构件中的水分受蒸发和风的影响，也有助于保持水化热。它在固化初期要固定好，它可以有足够的强度，使其在脱模和搬运过程中不会损坏。

　　After modification, it is usually necessary to wrap the mould with a clean polyethylene film, which makes the moisture in the GRC member subject to evaporation and wind and also helps to retain the heat of hydration. It should be fixed in the initial curing stage, and it can be strong enough that it will not be damaged during demoulding and handling.

　　脱模后继续保护GRC构件，防止其受到光、风、雨和低湿的影响。一般仍使用塑料薄膜包裹GRC以避免阳光直射，它们可以保持局部湿度。

　　After demoulding, continue to protect GRC components from light, wind, rain and low humidity. Plastic films are still used to wrap the GRC to protect it from direct sunlight, and they maintain local humidity.

　　GRC构件在存放和使用过程中，由于周围环境和维修阶段差异明显，还需要进行一定的维修操作。这时候可以用一些简单的方法来保证在存放的过程中不被放倒，它将暴露在直射阳光下。

　　In the process of storage and use of GRC components, due to obvious differences in the surrounding environment and maintenance stage, certain maintenance operations are needed. There are some simple ways to make sure it doesn't fall down during storage and that it will be exposed to direct sunlight.

　　此外，济南GRC构件的生产过程要了解到，施工准备入场组件检查各种五金、支架制作寻找外墙土建基线根据GRC配置规范放置线设置GRC组件位置堵塞、维修维护部分验收。

　　In addition, ji 'nan GRC component production process to understand, construction preparation entry components check all kinds of hardware, support production looking for external wall civil baseline according to the GRC configuration specification placement line set GRC component location blockage, maintenance acceptance.

　　根据建筑装饰的设计图纸测量现有建筑，结合图纸布局对钢骨架位置和GRC构件形状的要求，设计GRC构件，使GRC构件符合网格大小、位置，满足装饰设计的形状要求进行GRC零部件的生产加工。

　　According to the architectural decoration design drawings to measure the existing building, combined with the layout of the steel skeleton position and GRC component shape requirements, design GRC components, make GRC components in line with the grid size, location, meet the shape requirements of decorative design GRC parts production and processing.

　　GRC构件的实际维护过程分为以上几个阶段，对GRC的维护可以延长它们的使用时间，所以我们在维护过程中一定不能粗心大意，以免造成损坏。更多内容就来网站www.aswjc.com看看吧。

　　GRC component of the actual maintenance process is divided into the above several stages, the maintenance of GRC can prolong their use time, so we must not be careless in the maintenance process, so as not to cause damage. Find out more at www.aswjc.com.