From different materials, the shadow wall is divided into green brick shadow wall and glazed shadow wall. Stone shadow wall is very rare, and stone is often used locally in brick shadow wall.

影壁的名称根据位置和平面形式而定，有座山影壁、一字影壁、八字影壁和撇山影壁之分。

The name of the shadow wall depends on the location and plane form. It can be divided into mountain shadow wall, one character shadow wall, eight character shadow wall and mountain skimming shadow wall.

**种是琉璃影壁，主要用在皇宫和寺庙建筑，*具代表的是故宫和北海的九龙壁。

**One is the glazed shadow wall, which is mainly used in imperial palaces and temple buildings, * represented by the Forbidden City and the nine dragon wall in the North Sea.

第二种是砖雕影壁，大量出现在民间建筑中，是传统影壁的*主要形式。其中一些影壁的须弥座采用石料雕制，但极其罕见。

The second is brick carving shadow wall, which appears in a large number of Chinese folk buildings and is the main form of Chinese traditional shadow wall. Xumizuo in some of the shadow walls is carved from stone, but it is extremely rare.

第三种是石制影壁，移建到北海公园的铁影壁就是完全用石头雕制的，民间很少出现。

The third is the stone shadow wall. The iron shadow wall moved to Beihai Park is completely carved from stone, which rarely appears among the people.

第四种是木制影壁，由于木制材料很难承受长久的风吹日晒，一般也比较少见。

The fourth kind is wooden shadow wall. Because wooden materials are difficult to withstand long-term wind and sun, it is generally rare.

还有第五种影壁，砖瓦结构或土坯结构，壁身完全披盖麻灰，素面上色，有的还雕嵌砖材图案或文字，这一类影壁也不在少数。

There is also a fifth kind of shadow wall, brick and tile structure or adobe structure. The wall body is completely covered with hemp ash and painted on the plain surface. Some are also carved with brick inlaid patterns or characters. This kind of shadow wall is not a few.

浮雕的制作过程：。

Production process of relief:.

1，浮雕方案的设计:通过沟通，玻璃钢雕塑确定设计方案，这样才能进行下一步的工作。

1. Design of relief scheme: determine the design scheme of FRP sculpture through communication, so as to carry out the next step.

2，泥稿的制不锈钢雕塑作过程:这一步材算是真正意义上的开始做浮雕了，泥稿制作的好坏决定*终效果，所以在泥稿完成后一般会经过多次校正和审查。

2. The process of making stainless steel sculptures with clay manuscripts: this step is really the beginning of relief carving. The quality of clay manuscripts determines the final effect. Therefore, after the completion of clay manuscripts, they will generally be corrected and reviewed for many times.

3，浮雕翻制:在泥稿经过多多轮校正和修改后，经过审查满意后就开始进行翻制了，一般都是先做石膏模或硅胶模，翻制成玻璃钢，铸铜，砂岩等材质的作品。

3. Embossment reproduction: after many rounds of correction and modification, the clay manuscript will be reproduced after being reviewed and satisfied. Generally, gypsum mold or silica gel mold will be made first to turn it into works made of FRP, cast copper, sandstone and other materials.

4，浮雕上色:根据客户不同需求，后期进行颜色处理。

4. Embossing coloring: according to different needs of customers, color processing is carried out in the later stage.

5，浮雕安装玻璃钢雕塑:这是*后的一步了，也是很关键的一步了，由于现在雕塑工程质量出现很多的事故，所以浮雕作品安装时一定要固定好，要确保工程质量同时尽量保持浮雕的完整性和性。

5. Installation of glass fiber reinforced plastic sculpture in relief: This is not only a step after * but also a key step. Because there are many accidents in the quality of sculpture Engineering, the installation of relief works must be fixed. First, ensure the engineering quality and try to maintain the integrity and perfection of relief.