现在的人比较喜欢西式的装修，但是在西式的装修当中运用比较多的建筑材料是grc构件，这种材料对建筑的美观性有着大大的提升作用，那么济南GRC构件要怎么装才能做到美观实用？
Now people prefer western decoration, but in the western decoration of the use of more building materials is GRC components, this material has a great role in improving the beauty of the building, so how to install ji 'nan GRC components to achieve beautiful and practical?
操作条件：主体结构验收合格，平整度、垂直度符合规范要求，结构表面须牢固光滑。
Operating conditions: main structure acceptance, flatness, verticality in line with the requirements of the code, structure surface must be firm and smooth.
弹性线：GRC装饰构件一般安装在平面、内角和其他部件上，而平面安装则需要在组件的水平和垂直方向设置控制线。安装在遮阳角上的部件需要在两面上都有弹性水平控制线和垂直控制线。
Elastic lines: GRC decorative components are generally installed on flat surfaces, inside corners and other components, while flat installation requires control lines to be set in the horizontal and vertical directions of the components. Parts mounted on shading angles require elastic horizontal and vertical control lines on both sides.
钻孔：由于GRC装饰构件主要依靠预留在增强水泥上的地脚螺栓与实体结构连接，孔的深度、直径和位置必须满足要求。针对不同的部件选择不同的锚固螺栓。根据构件上的孔位和结构表面控制线钻孔。
Drilling: Since the GRC decorative components are mainly connected to the solid structure by the anchor bolts reserved on the reinforced cement, the depth, diameter and location of the holes must meet the requirements. Different anchoring bolts are selected for different parts. Drill holes according to the hole position on the member and the control line on the structure surface.
修正。一般来说，两个人同时负责纠正和固定GRC零件安装部件。大型部件需要用倒链或电动葫芦移动。，部件的孔位与钻孔对齐，地脚螺栓是固定的对角线，安装位置用水平尺和铅锤检查，地脚螺栓被准确地拧紧，以确保部件的接触面接近附件表面。
Correction. Generally, two people are responsible for correcting and securing the GRC component mounting parts. Large parts need to be moved by reverse chain or electric hoist. First, the hole position of the component is aligned with the drilling hole, and the anchor bolts are fixed diagonally. The installation position is checked with a level and plumb hammer, and the anchor bolts are tightened accurately to ensure that the contact surface of the component is close to the accessory surface.
安装
济南GRC构件或特殊grc构件不能使用紧固锚时，须安装grc构件中的埋设部件，并在连接器的嵌入式部件上涂上防锈漆。
When installing Ji 'nan GRC components or special GRC components can not use the fastening anchor, the embedded parts of the GRC components must be installed, and the embedded parts of the connector are coated with anti-rust paint.
The above is our share of the content, I hope the above content can help you. For more information, please visit our official website www.aswjc.com.
