玻璃钢雕塑厚度不能决定质量，取决于玻璃钢纤维布的层数，所用树脂的质量，正常厚度是3MM，大型的雕塑需要做钢骨架支撑，正确的玻璃钢雕塑制作方法是均匀的薄薄的树脂铺垫一层纤维布，按这个工序重复3-5遍，如果当是靠树脂来堆积厚度，玻璃钢雕塑没有纤维布的保护，很容易就断裂了。

The thickness of FRP sculpture can not determine the quality, it depends on the number of layers of FRP fiber cloth and the quality of resin used. The normal thickness is 3 mm. Large sculpture needs to be supported by steel framework. The correct method of making FRP sculpture is to evenly lay a layer of fiber cloth with thin resin. Repeat this process for 3-5 times. If the thickness is accumulated by resin, there is no fiber in FRP sculpture Vibe's protection, it's easy to break.
          

玻璃钢雕塑制作工艺：成品制作前，先将所要制作的产品用特定泥塑材料造出相应要制作的产品，在泥塑稿制作完成后，翻制石膏外模，然后将玻璃钢(即树脂和玻璃丝布的结合物)涂刷在外模内部。等其干透后打开外模，经过合模的程序，获得玻璃钢雕塑成品。但玻璃钢雕塑在室外经过太阳的暴晒和风蚀，一般五年以上就开始有变形，脆弱易裂的缺点。

Glass fiber reinforced plastic sculpture production process: before the production of finished products, the products to be made should be made with specific clay sculpture materials. After the clay sculpture is made, the plaster external mold is turned over, and then the glass fiber reinforced plastic (that is, the combination of resin and glass fiber cloth) is painted inside the external mold. After it is completely dried, open the outer mold, and get the finished product of FRP sculpture through the mold closing procedure. However, after being exposed to the sun and eroded by wind, FRP sculptures begin to deform and crack after more than five years.

玻璃钢雕塑厚度越厚，相对应的也会越贵，综上所述，玻璃钢雕塑厚度并不是越厚越好！

The thicker the FRP sculpture is, the more expensive the price will be. To sum up, the thicker the FRP sculpture is, the better!