For the first design drawing before making FRP relief, you can find some cases on the Internet. If it is not suitable, you can find a professional customized relief design company. The sculpture design company will design according to the design needs of the actual situation, and the effect drawings can be handed over to the manufacturer for relief design.

在确定浮雕设计方案后,要做的就是创建泥草案,它需要雕塑师,泥稿完成后浮雕是什么样,所以这一步是非常重要的,泥稿生产也是一个再创造的过程,雕塑家谁能设计方案进行小的调整根据实际情况,目的是让救援工作更加完 美。

After determining the relief design scheme, the first thing to do is to create the mud draft. It requires professional sculptors. What is the relief like after the mud draft is completed, so this step is very important. The mud draft production is also a process of re creation. Sculptors who can make small adjustments to the design scheme according to the actual situation, in order to make the rescue work more perfect.

泥稿制作完成后要进行模具生产、大规模定制救济通常用石膏模具的选择与石膏,石膏模具必须选择使用滑石粉和其他杂质等更多的石膏模具制作,模具可能出现毁灭性破坏,需要风险,所以石膏必须谨慎的选择。在石膏模具之前,需要救援,使容易完整的模具尺寸和完成运动和已故的过程中,一般使用塑料或纸上插入压花泥浆草案分为几块,然后把石膏铸草案泥混合物,如石膏凝固后和热量,可以取下来的石膏模具这个过程需要小心,尽可能确保模具的完整性。然后将泥浆从模具中取出，根据需要将模具晾干。

After the completion of mud draft production, mold production and mass customization relief usually use gypsum mold selection and gypsum. Gypsum mold must be made with more gypsum molds such as talc powder and other impurities. The mold may have destructive damage and need risks, so the stone paste must be selected carefully. Before the gypsum mold, it needs to be rescued to make it easy to complete the mold size and complete the movement and dead process. Generally, the embossing mud draft is inserted on plastic or paper and divided into several pieces, and then the gypsum cast draft mud mixture, such as the gypsum after solidification and heat, can be removed from the gypsum mold. This process needs to be careful to ensure the integrity of the mold as much as possible. Then remove the slurry from the mold and dry the mold as needed.

模具制作好后，就可以制作玻璃钢了。向树脂中加入滑石粉，拌匀后加入促进剂和固化剂。然后你可以把糊状树脂倒入石膏模具中。注意树脂的均匀厚度，在树脂凝固前完成所有的工作。下一步需要切成小块的玻璃丝绸与树脂坚持的一层树脂固化前,按一块粘贴,这样整个玻璃丝绸布浸泡在树脂,一般情况需要坚持3-4层的布,所以强度和韧性。

After the mold is made, FRP can be made. Add talc powder to the resin, mix well, and then add accelerator and curing agent. Then you can pour the paste resin into the plaster mold. Pay attention to the uniform thickness of the resin and complete all work before the resin solidifies. In the next step, the glass silk needs to be cut into small pieces and pasted with a layer of resin before curing. In this way, the whole glass silk cloth is soaked in resin. Generally, it needs to adhere to 3-4 layers of cloth, so it has strength and toughness.

当玻璃钢完全固化后，可以将玻璃钢从模具中取出，石膏模具被卡住的地方可以被打破。移除的玻璃钢需要修补和打磨，拼接需要完成。就要给玻璃钢着色了，以仿铜为例，可以用丙烯颜料进行绘图，深地色，在凸出处加上金属铜色，也可以用油漆、铜粉等其他材质进行着色。

When the FRP is fully cured, the FRP can be removed from the mold, and the stuck part of the gypsum mold can be broken. The removed FRP needs to be repaired and polished, and the splicing needs to be completed. Glass fiber reinforced plastics are about to be colored. Taking imitation copper as an example, propylene pigment can be used for drawing, deep ground color, metal copper color can be added at the protrusion, or paint, copper powder and other materials can be used for coloring.

浮雕的安装,需要的施工人员,一般要求钱在墙上在膨胀螺钉将固定在墙上的玻璃钢救援,缝合和螺钉孔位置修复着色,所以玻璃钢救援工作就完成了。

The installation of relief requires professional construction personnel. Generally, money is required on the wall. The expansion screw will fix the FRP rescue on the wall, and repair and coloring the position of suture and screw hole. Therefore, the FRP rescue work is completed.

以上就是有关山东浮雕雕塑厂家的相关知识，如果还想了解更多，欢迎前来咨询，我们乐意为您解答。

The above is the relevant knowledge about Shandong relief sculpture manufacturers. If you want to know more, welcome to consult. We are happy to answer for you.