欧式构件在我们的生活中是比较常见的装饰材料之一，我们都知道，质量轻的构架在安装后才能使用更长久，所以降低欧式构件的重量是延长其使用寿命的关键因素之一。GRC构件厂家带你一起了解一下减轻欧式构件重量的方法！
European style component is one of the common decorative materials in our life. We all know that the light-weight frame can only be used for a long time after installation, so reducing the weight of European style component is one of the key factors to extend its service life. GRC component manufacturers take you to understand how to reduce the weight of European components!
要想减少其净重，还是先要减少商品的薄厚，倘若薄厚很大，那麼净重当然也就较为大，因而就要在其考虑承受力的前提条件下适度的缓解薄厚，可是也不可以过多，不然非常容易断裂；次之欧式构件是一种新式的高分子材料，其关键原材料为混合砂浆，因而倘若要想缓解净重，比不上从其內部要添加的化学物质下手，以质轻原材料来开展替代。
If you want to reduce the net weight, you should first reduce the thickness of the goods. If the thickness is very large, then the net weight will be relatively large. Therefore, you should moderately alleviate the thickness under the premise of considering the bearing capacity, but not too much, otherwise it is very easy to break; Secondly, European style component is a new type of polymer material, and its key raw material is mixed mortar. Therefore, if you want to alleviate the net weight, you can't start from the chemical substances to be added inside, and replace it with lightweight raw materials.
缓解了欧式构件的净重，那么还必须考虑到的就是说防止裂痕的造成了：
In order to reduce the net weight of European style components, it is also necessary to consider the prevention of cracks
1、竖向联接预制构件的按段设计方案要防止将预制构件的净重传送给下一层预制构件。
1. The section by section design scheme of vertical connection of prefabricated components should prevent the net weight of the top layer prefabricated components from being transmitted to the next layer prefabricated components.
2、保证竖向持续预制构件相接处的间隙总宽和处理过程与水准持续预制构件同样。
2. Ensure that the total gap width and treatment process of vertical continuous prefabricated components are the same as that of horizontal continuous prefabricated components.
3、依据建筑立面实际效果规定和构造标准及其运送生产制造安裝预制构件的标准来明确预制构件的长短，其单条长短要在维持在1.2~3.6米。
3. According to the actual effect regulations and construction standards of building facade, as well as the standards for transporting, manufacturing and installing prefabricated components, the length of prefabricated components should be determined, and the length of a single strip should be maintained at 1.2 ~ 3.6 meters.
4、一定要依据房屋建筑的中 心线规格和窗门洞的部位及其墙面的拐角转变状况来明确每一个欧式构件的长短，进而使其联接缝的部位和房屋建筑的里边产生融洽对称性。
4. It is necessary to define the length of each European component according to the specifications of the center line of the building, the position of the window and door opening and the corner transformation of the wall, so as to make the joint position harmonious and symmetrical with the interior of the building.
以上就是GRC构件厂家整理的几点关于欧式构件重量减轻的方法，相信通过本文的描述，你能有所收获，希望以上内容能对你有所帮助。另外，若你想要了解更多相关资讯，可以多多关注我们的网站动态。
The above is the GRC component manufacturers to sort out a few European style component weight reduction methods, I believe that through the description of this article, you can gain, I hope the above content can help you. In addition, if you want to know more about it, you can pay more attention to our website.
