1、GRC构件装置差错应契合下列请求;
1. GRC component device error shall comply with the following requirements;
单位装修面得笔直度差错≤5mm/层高，且总差错≤50mm;
Straightness error of unit decoration surface ≤ 5mm / floor height, and total error ≤ 50mm;
单位装修面的平直度差错≤5mm/2m，且总差错≤50mm;
Flatness error of unit decoration surface ≤ 5mm / 2m, and total error ≤ 50mm;
2、 GRC构件装置前应对建筑物衔接结构外表进行处理，保证其平坦、坚实。
2. Before GRC components are installed, the surface of the building connecting structure shall be treated to ensure that it is flat and solid.
3、 GRC构件外表有缺棱掉角等缺点时，装置后应选用水泥拌合资料进行修补。
3. If the GRC component has defects such as missing edges and corners on the surface, the cement mixing data shall be selected for repair after the installation.
GRC构件安装重要步骤
Important steps for GRC component installation
4、装置接槎应平顺，差错超过5mm时，应进行打磨处理。
4. The joint of the device shall be smooth. When the error exceeds 5mm, it shall be polished.
5、 GRC构件衔接应预留缝隙，并依据规划请求进行处理。
5. Gaps shall be reserved for the connection of GRC components and handled according to the planning requirements.
6、外架搭设时充分考虑GRC线条的装置特色及外挑尺度，保证装置GRC线条时有满足的距离
6. When erecting the outer frame, fully consider the device characteristics and overhang scale of GRC lines to ensure that the GRC lines of the device have a satisfactory distance
7、装置前应依据施工图纸在外墙上弹好标高线、水平、笔直和构件基地操控线以操控GRC构件装置在同一水平线上。
7. Before installation, the elevation line, level, straightness and component base control line shall be snapped on the outer wall according to the construction drawings to control the GRC component device on the same horizontal line.
8、有防水请求的部位，应进行防水处理，并采纳必要的防冻害办法。裸露于空气中的链接件及焊缝应进行可靠地防腐处理。
8. Waterproof treatment shall be carried out for parts with waterproof requirements, and necessary anti freezing measures shall be adopted. The links and welds exposed in the air shall be subject to reliable anti-corrosion treatment.
The above wonderful content comes from Shandong GRC component. For more wonderful content, please click to enter our website: http://www.aswjc.com , we will have more wonderful content for you to see
