The development of sculpture in China can be said to be very long, but abroad is not bad. Next, let's talk about what we should pay attention to when processing stainless steel sculpture?

不锈钢雕塑在现代雕塑艺术中占有重要地位。不锈钢具有多种表面处理以拓宽其应用领域，而不同的表面处理使不锈钢的表面是不同的，使其在应用上是独特的。不锈钢雕塑表面常用镜面不锈钢、拉丝不锈钢、不锈钢漆、彩色不锈钢。

Stainless steel sculpture plays an important role in modern sculpture art. Stainless steel has a variety of surface treatment to broaden its application field, and different surface treatment makes the surface of stainless steel is different, making it unique in application. Stainless steel sculpture surface commonly used mirror stainless steel, drawing stainless steel, stainless steel paint, color stainless steel.

1、一般机械抛光工序分为几步？

1. General mechanical polishing process is divided into several steps?

粗磨:主要是用砂粒磨料对粗糙工件表面进行磨削，去除表面的宏观不平。

Rough grinding: mainly grinding the rough workpiece surface with sand abrasive to remove the macro unevenness of the surface.

中磨:在粗磨的基础上进一步抛光，去除粗磨痕迹，经过此工艺，工件表面逐渐光滑光亮。

Medium grinding: further polishing on the basis of rough grinding to remove rough grinding traces. After this process, the surface of the workpiece is gradually smooth and bright.

精磨:精磨工艺，达到理想的亮度。

Fine grinding: fine grinding process, to achieve the desired brightness.

为了获得更好的抛光性能，需要选择合适的抛光蜡。使用不同的颜色来标记不同种类的抛光蜡，以避免混淆。高含砂量的磨料可以加速整个抛光过程。该工艺是去除抛光蜡和砂轮表面，使材料光滑。

In order to obtain better polishing performance, it is necessary to select suitable polishing wax. Use different colors to mark different kinds of polishing wax to avoid confusion. Abrasive with high sand content can accelerate the whole polishing process. The process is to remove the polishing wax and the grinding wheel surface to make the material smooth.
               

2、机械抛光中常用的术语有哪些？

2. What are the common technical terms in mechanical polishing?

磨料:抛光蜡中的一种颗粒，用作调平工具。

Abrasive: a particle in polishing wax used as a leveling tool.

油脂:硬脂酸、脂肪酸、石蜡等。

Oil: stearic acid, fatty acid, paraffin, etc.

切削力:抛光蜡通过抛光工件而被磨平的能力。

Cutting force: the ability of polishing wax to be smoothed by polishing the workpiece.

3、如何使用抛光轮和抛光蜡？

3. How to use polishing wheel and wax?

抛光轮向操作者的方向滚动，并获得足够的速度。将抛光蜡轻轻置于车轮边缘，并确保其位于滚动轴水平面的下方，直到抛光蜡完全覆盖在滚动轴表面。轻轻地将一块干净的金属放在抛光轮的表面几秒钟，使蜡散开。重复几次，使蜡均匀地覆盖在金属表面。当表面完全被蜡覆盖时，可以进行抛光处理。如有必要，可将抛光蜡重新涂在车轮上。用于粗磨、中磨(切削磨)和细磨(抛光)的砂轮应分开，而且必须分开，否则在抛光过程中粗糙的颗粒会划伤金属表面。

The polishing wheel rolls in the direction of the operator and gains enough speed. Place the polishing wax gently on the edge of the wheel and make sure it is below the horizontal surface of the rolling axle until the polishing wax completely covers the surface of the rolling axle. Gently place a clean piece of metal on the surface of the polishing wheel for a few seconds to disperse the wax. Repeat several times to make the wax evenly cover the metal surface. When the surface is completely covered with wax, it can be polished. If necessary, reapply polishing wax on the wheels. The grinding wheels used for rough grinding, intermediate grinding (cutting grinding) and fine grinding (polishing) should be separated and must be separated, otherwise the rough particles will scratch the metal surface in the polishing process.

以上就是有关不锈钢雕塑的相关知识，如果还想了解更多，欢迎前来咨询，我们乐意为您解答。

The above is about stainless steel sculpture related knowledge, if you want to know more, welcome to consult, we are willing to answer for you.